Label production process requirements and precautions

In practical applications, our mechanical products, furniture products, are not without signs equipped. A high-quality product, equipped with a good sign, can not only enhance the brand awareness of the company's products, but also make the products more upscale. Therefore, when we understand the sign manufacturers, we need to understand some sign production process requirements and precautions in order to better choose.

So, what are the requirements and precautions of the signage production process? Small series here specifically tell the following:

First, stainless steel signs process requirements:

1, stainless steel plate must be planing and bending welding (stainless steel plate must be planing and bending first to ensure the edge of the straight degree); Ensure that the arc Angle R at the bending point is less than 1MM.

2. Remove the surface oil before welding to reduce defects such as virtual welding, pores, cracks and so on.

3, after welding, all visible welds will be polished smooth, as smooth as the surrounding surface, no obvious scratches.

Second, aluminum alloy plate profile requirements:

1, aluminum alloy profiles and commonly used plastic material accessories should meet the quality requirements of aluminum alloy plate profiles.

2. The angular base deviation of aluminum alloy profiles is less than 1 degree of positive and negative deviation.

3, the plane clearance <=0.4%*B(B is the width of the profile).

Third, the appearance of the completed sign requirements note:

1, after the installation is completed, the appearance of the sign is beautiful, the surface is without screws, no scratches, bubbles and obvious color uneven, the paint must be no obvious color difference, the materials used meet the requirements of the design scheme.

2, the installation of the sign is easy to replace and maintain the panel.